So, I had to buy a whole half of my mirror (It's the inner plastic part that you can only buy with all of the electronics and whatnot)
![Image](http://levelgame.net/moe/5.jpg)
I don't need the part that the glass attaches to, nor the hinge, fortunately, those came off with only 4 screws.
![Image](http://levelgame.net/moe/3.jpg)
This also meant I did not have to take the whole door panel off to remove the mirror, as I had worried that I would! I just had to pop the back(Front?, the ones that face the front of the car) plastic pieces off and remove those same 4 screws.
![Image](http://levelgame.net/moe/1.jpg)
One thing I was worried about was the blind spot sensor, I wasn't sure how that got removed, luckily it was just 2 push tabs on the side.
![Image](http://levelgame.net/moe/2.jpg)
Pop that sucker in the new piece, and viola, just put it on, reattatch the cables, put those 4 screws in, and pop the back pieces back on.
![Image](http://levelgame.net/moe/4.jpg)
Here's what I'm talking about, how it broke. I had driven around for about a month like this, which through that broken piece would expose the plugs sorta to the elements more than they otherwise would be. (It's a mirror, none of the back is actually sealed, so its already technically exposed, this just provided an extra opening.)